#Assemble wpa2 hash install
#Assemble wpa2 hash manual

The no form of the command disables the down-recovery-interval, and the state of the cellular MDA is not monitored other than for dual SIM operation and criteria configured for automatic failover (see failover-criteria for more information). This interval can be used to collect information for further debugging and analysis. Prior to resetting, the node will issue a log event stating that the node will reset within 60 seconds. If the cellular MDA has not successfully achieved service based on the down-recovery-criteria value set for either SIM 1 or SIM 2 within the specified length of time, the node resets. When configured, this option provides a hardware reset to unblock any potential hardware lockup conditions related to the cellular radio modem or to guard against persistent cycling of automatic switchovers between SIMs in a dual SIM deployment. It is used in conjunction with the down-recovery-criteria command. This command configures the length of time in which the cellular MDA must establish cellular service for a SIM before the node resets.

If the active-sim value is changed from auto to 1 or from auto to 2 and the active SIM is the same as the new configuration, there is no change to service of the active SIM. The preferred-sim command specifies whether SIM 1 or SIM 2 is used for a cellular port after a system reset. When the auto parameter is set in a dual SIM deployment, the node must be configured with a preferred SIM. The settings configured for the failover-criteria command determine when an automatic failover will occur. An automatic failover occurs when activity switches from one SIM to the other. Selecting auto enables automatic failover in a dual SIM deployment.

#Assemble wpa2 hash install

The operator must either install the SIM in the appropriate slot or change the configuration in order to bring up the service. If a SIM is specified but is not physically installed in the associated SIM slot, the cellular port remains operationally down. Ensure that there is service on the other SIM before changing the active SIM. The recovery time after making the change can range from a few seconds to up to a few minutes.

#Assemble wpa2 hash manual

Changing the active SIM from 1 to 2 or vice versa is considered a manual switchover and is service-affecting.